max width 700mm paper slitter rewinder with laminating function
this one is non-standard machine , according to customer requirement
max width : 700mm
laminating function
photo electric eye for alignment function
waste discharge function
slitting of trim edge
rewinding at one shaft
Automatic Slitting Machine for PU Foam/ EVA Foam(CE approval)
Kraft Paper,Offset Paper,Sand paper, Insulation Paper Slitter Machine
DP-700 Automatic Slitting Machine
this one is non-standard machine , according to customer requirement
max width : 700mm
laminating function
photo electric eye for alignment function
waste discharge function
slitting of trim edge
rewinding at one shaft
Automatic Slitting Machine for PU Foam/ EVA Foam(CE approval)
Kraft Paper,Offset Paper,Sand paper, Insulation Paper Slitter Machine
DP-700 Automatic Slitting Machine
Purpose:
This machine is applicable for the vertical slitting of varius rolling-shape materials such as industrial adhesive tapel, sheet, aluminum foil, copper foil, compound plastic sheet, etc.
Functional characteristics:
This machine is of photoelectric track and rectification system, and the magnetic power clutch is adoppted to control the feeding and receiving tension.
Main machine is of frequency conversion speed regulation. The slitting width can be adjusted as requested.
It enjoys characteristics such as fast slitting speed, ease of operation and maintenance.
Model: DP-700 Slitting Machine
Max Feeding Width ( mm ):700
Main Engineer Power ( kw ): 3
Speed ( M/M ): 80
Size ( mm ): 2400*1700*1450
Weight ( kg ): 1000
Rewinding Diameter ( mm ): 800
Winding Diameter ( mm ): 800
Precision ( mm ): ±0.10
Power: 220V 50Hz
Finished products :
Machine Name :DP-700 Slitting Machine |
1. Technique Data Machine Speed : 80m/min Max material diameter : 700mm Feeding Diameter : 800 mm Rewinding diameter : 800mm Slitting accuracy :±0.1mm Voltage:380V 50HZ Power :3kw Raw material Max inner hole diameter: 3" compress air source:(0.4-0.6)Mpa(customer-owned) Finished products Min. Width by standard slitting :15MM 2, Feeding Device Feeding Air Expansion Shaft (3"Pad Shaft) 2 Sets magnetic powder brake 100N 1 Set Film release Magnetic Powder Brake 50N 1 Set Feeding Tension Control System 2 Sets Correction System(Taiwan Gas and Liquid correction) 1 set 3, chart drive assembly : Upper rubber roller Dia.135(PU) 1 Set Under rubber roller Dia.135(PU) 1 Set Aluminum guide roller(hard Oxygen surface treatment) 1 Set Pressure roller pneumatic type top and bottom system adjustable : 1 Set electronic counter 1 Set Film Release tensioning adjustable system 1 Set 4. Slitting Part Upper Circular knife shaft Dia 65(upper slitter Dia 90*60 ) 1 Set Under Circular knife shaft Dia 65 (under slitter Dia 70*45 ) 1 set Manual fine-tuning lock device 5. Reeling end Receiving Flatulence axis(3″Pad shaft) 2 Sets magnetic powder clutch 50N 2 Sets The receiving tension control system 2 Sets Main electrical machine (double motor) 1 Set Main Power inverter 1 Set Winding shaft and pneumatic up and down device(Rise,descend ,support) 1 Set 6. Operator control box 1 Set 7.Electric control panel 1 Set 8. Function Profile frequency control of motor speed, operation more easy. Control more accurate. Double receiving roller center take up , rewinding Double receiving magnetic powder tension independent control, can rewinding at the same time , and also can individual use Electronic meter counter with the function of automaticly count the meter and setting length, automatic stopping ,accuracy 0.01, error ±0.15M Independent fan waste discharge. Double motor configuration,The scroll of rewinding can be positive and negative transfer . 9. Slitting part Slitting up and down cutter 8 sets Circle tool apron 8 sets Slitting up and down cutter gasket:1/2/5/20/30/50 each 13 pieces,10MM 12pcs |